This is how you can connect the Blerron Flex or Blerron Flex Pro
Blerron Flex
Check the two connection options below
Option 1:
Your laptop has only 1 USB-C port that supports video and power.
This is how you can connect:
- Monitor 1: 1x HDMI to USB-C
- Monitor 2: 1x USB-C
Option 2:
Your laptop has 2 USB-C ports that supports video and power.
This is how you can connect:
- Monitor 1: 1x USB-C
- Monitor 2: 1x USB-C
Blerron Flex Pro
Check the two connection options below
Option 1:
A dedicated driver is required to enable the full multi-screen setup. The software is safe, easy to install, and ensures stable performance every time you connect.
In most cases, one USB-C cable is enough to handle both display and power.
If the screens don’t turn on or appear unstable, your laptop may not deliver sufficient power through a single port. In that case, simply connect an additional USB-C cable for extra power — see Option 2.
Once installed, the setup is plug-and-play and works instantly whenever you connect.
Option 2:
If your laptop does not supply enough power through a single USB-C port, an additional USB-C cable is required.
In this setup, one USB-C/A cable is used for display and data, while the second USB-C/A cable provides extra power to ensure both screens operate reliably. This guarantees stable brightness, consistent performance, and prevents screens from turning off or not being detected.
Once connected, the system works normally — no extra configuration needed beyond the initial software installation.
Blerron Flex
