Blerron Flex connection

Cables needed (all cables and adapter included):

  • 1x USB-C to USB-C
  • 1x H5 adapter USB-C to USB-C
  • One time driver installation, check driver section.

MacBooks with an M1, M2, or M3 chip are limited to just one external display by Apple.

To enable multiple screens, we use a specific adapter and driver from Silicon Motion, a publicly listed technology company whose technology is used by major brands like Dell, HP, Lenovo, and Samsung. The driver is safe, widely used, and does not interfere with your system.

After a one-time installation, you can easily use multiple screens simultaneously.

Check installation below:

Download link
How does the driver work?

The Silicon Motion driver runs in the background as a display service. It captures the visual output from your system, compresses it, and sends it over USB to external screens, where it is rendered again.

It does not read, store, or transmit personal files or user data. It only processes pixel data (the same image your GPU would normally send through HDMI or DisplayPort). Official versions are digitally signed and approved by Windows/macOS, which prevents tampering.

Because it operates purely on display output and within the OS security framework, it does not pose a privacy or data theft risk when installed from a trusted source.

How to set up the Blerron Flex / Flex Pro:

  1. Remove the cables from the sleeve
  2. Take the Blerron Flex or Flex Pro out of the sleeve
  3. Fold the screens out of the frame
  4. Extend the holder
  5. Place the holder on the laptop
  6. Position the stand behind the holder to support the laptop
  7. Next, connect the cables. See section “Connection”

How to install the foldable stand:

  1. Turn the laptop upside down
  2. Remove the protective film from the adhesive strip
  3. Place the stand in the center on the bottom of the laptop
  4. Fold the stand open
  5. Can be used in two positions
  6. Attach Blerron Flex or Flex Pro

Menu settings:

  1. Press the scroll wheel (middle) to open the menu
  2. Press the scroll wheel (middle) to select a setting
  3. Press the scroll wheel (middle) again to open the setting
  4. Scroll left or right to adjust the setting
  5. Press and hold the scroll wheel (middle) for 2 seconds to go back one step

Positioning the screens correctly:

  1. Go to display settings
  2. Click “Arrange”
  3. Identify the position of the screens
  4. Drag the screens to the correct position

Screens are duplicated:

  1. Go to display settings
  2. Open the “Use as” tab
  3. Select “Stop mirroring”
  4. Drag the screens to the correct position

Comparison

Blerron Flex - 14

Blerron Flex - 14"

Blerron Flex - 15.3

Blerron Flex - 15.3"

1920 x 1080

Resolution

1920 x 1200

14"

Screens size

15.3"

1 KG

Weight

1.2 KG

76%

sRGB

100%

16:9

Aspect ratio

16:10

300 nits

Brightness

300 nits

60 Hz

Refresh rate

60 Hz

Flex

vs

Flex Pro

Always

Driver

Always

2

Cables

1

Select your setup

Questions? Don’t hesitate to reach out.

Contact us